Carburetor Removal

Remove sensor...

Now that we have pretty easy access to the carburetor, you will want to disconnect the Throttle Position Sensor and remove the Breather Tube from the cylinder head cover. Route the breather tube under the throttle cables and under the frame spar on the right side. Also, follow your throttle cables up from the carburetor and see if there are any OEM ties that are holding them to the shroud mount or on the top of the radiator, if so, undo them so the cables are free.

Remove carb...

Now that we have everything out of the way, you can gently pull back on your carburetor and lift it out of position. It should be able to rest over the right frame spar.

Remove bolt...

The next thing you need to do is to remove the Throttle Drum Cover Bolt. Once you have the Throttle Drum Cover off, we can then expose part of our meat and potatoes to this mod.